Please use this identifier to cite or link to this item:
|Title:||Modeling and simulation of photovoltaic cell/module/array with two-diode model|
|Keywords:||Double Diode, Photovoltaic Cells/Modules/Arrays, Modeling, Two-diode.|
|Publisher:||International Journal of Computer Technology and Electronics Engineering (IJCTEE)|
|Abstract:||The purpose of this paper is to propose a MATLAB/ Simulink simulators for PV cell/module/array based on the Two-diode model of a PV cell.This model is known to have better accuracy at low irradiance levels which allows for more accurate prediction of PV systems performance.To reduce computational time , the input parameters are reduced as the values of Rs and Rp are estimated by an efficient iteration method. Furthermore ,all of the inputs to the simulators are information available on a standard PV module datasheet. The present paper present first abrief introduction to the behavior and functioning of a PV device and write the basic equation of the two-diode model,without the intention of providing an indepth analysis of the photovoltaic phenomena and the semicondutor physics. The introduction on PV devices is followed by the modeling and simulation of PV cell/PV module/PV array, which is the main subject of this paper. A MATLAB Simulik based simulation study of PV cell/PV module/PV array is carried out and presented .The simulation model makes use of the two-diode model basic circuit equations of PV solar cell, taking the effect of sunlight irradiance and cell temperature into consideration on the output current I-V characteristic and output power P-V characteristic . A particular typical 50W solar panel was used for model evaluation. The simulation results , compared with points taken directly from the data sheet and curves pubblished by the manufacturers, show excellent correspondance to the model.|
|Appears in Collections:||Engineering and Technology Faculty|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.